LA1034 LogicPort Specifications and Characteristics
Sampled channels: 34
Timing mode sample rate: 1KHz to 500MHz (uses internal clock)
State mode sample rate: 0 to 200MHz (clock provided by circuit under test)
Sample buffer: 34 x 2048 samples
Maximum sample compression: 2^33 to 1 (sample rates to 200MHz)
Trigger sequencer: 250MHz max, 4ns minimum pulse width
Trigger capability:
    Edges - Rising, Falling, Either (multiple channels, any combination)
    Patterns - True, False, Entered, Exited (across any / all channels)
    Bus Value - Equal, Not Equal, Less Than, Greater Than, In Range, Not in Range
    Occurrence Count - Range of 1 to 1,048,576 Consecutive or Cumulative
    Duration - Equal, Less Than, Greater Than, Within Range (samples or time)
Input impedance: 200K Ohms, paralleled by <5pF
Frequency counter range: 300MHz with 10Hz resolution, 4 channels
Threshold range: adjustable +6 to -6 volts with 50mv resolution
Threshold accuracy: +/-(100mV + 5% of setting)
Channel to channel skew: 0.6ns typical, 1.0ns max
State mode Setup/Hold times: 2.0/0ns, window adjustable +/-2.5ns
Input sensitivity: 0.25Vpp @50MHz, 0.5Vpp @150MHz, 0.8Vpp @250MHz
Input dynamic range: 10 volts peak-peak
Maximum input: +/-40 volts DC, 15 volts peak-peak pulse amplitude
Timebase accuracy: +/-0.005% over full temperature range
Input Probe: Teflon insulated leads terminated with female contacts
                        compatible with 0.025"-0.030" round or square pins.
Power supply current: 200 milliamps max (supplied by USB)
Temperature range: operating +5 to +50C, storage -10 to +65C
Interpreted Protocols (included):
    Asynchronous Serial (RS232, RS422 and RS485 to 25Mbps)
    Synchronous Serial (SPI, PS2 and proprietary formats)
    Inter-Integrated-Circuit (I2C)
    CAN 2.0A and 2.0B
    Synchronous Parallel (Quad/multi-IO SPI and proprietary formats)
    1-Wire (Dallas/Maxim devices/iButton)
    ISO7816-3 (Smart Card and SIM devices)
Minimum system requirements:
    Intel Pentium 4 or AMD Athlon (1.6GHz or faster recommended)
    32MB available memory (128MB recommended)
    800 x 600 standard DPI display (1920 x 1080 recommended)
    USB 1.1, 2.0 or 3.0 port
The LA1034 is compatible with the following operating systems:
    Windows XP (32 and 64 bit versions)
    Windows Vista (32 and 64 bit versions)
    Windows 7 (32 and 64 bit versions)
    Windows 8 (32 and 64 bit versions except ARM-based)
    Windows 10 (32 and 64 bit versions except ARM-based)
Specifications subject to change without notice
Trademark Acknowledgement
Intronix is a registered trademark of Intronix Test Instruments, Inc. USA. All other referenced marks, whether claimed or registered, are for identification purposes only and are the exclusive property of their respective owners.
All content Copyright 2005-2023 Intronix